[ann]FOXCOIN-REBORN [quark-mn-pow-pos] Airdrop & more

TopicStarter: FoxcoinReborn –
Newbie

[browser-shot url=”gyazo.com” width=”800″]


Website gyazo.com
Registrar domain eNom, LLC
Domain reg 2007-08-31
Domain exp
Nameservers gail.ns.cloudflare.com
tom.ns.cloudflare.com
Show forum topic
Remember fox coin vo1? we wanted to dev a remake vo, with many new features and with other code base, with a very fair masternode collateral cost, and specifications, you're invited to mine
FOX from your computer, it will take you the time to download and back up your wallet and type setgenerate true -1 in your debug console, you will be able to set a mn with just mining 20 blocks

https://i.gyazo.com/94a0865c1cdf0d9c46e306d76f7b68bd.png


Use the following instructions to mine a block.

Code:
Open your wallet, and make sure your wallet is connected with a node. 
Your wallet is connected when you see the icon Wallet connections Quark in the lower right corner of your wallet.

The message �No block source available� will disappear once you mine your first block.

Go to Tools.
Click Debug console.
This is the console where you will execute all commands.

Type this command to start mining your first block:

setgenerate true -1

If you want to use a specific number of CPU cores, instead of -1, type the number of cores.

You can type the following command to see the status of generation.

getmininginfo

https://gyazo.com/03393bee9dad4612c05237acc6e89468


Masternode rewards will start after the last PoW block is mined.
The following is required 260 blocks before the last PoW block is mined.
Use the following instructions to setup a masternode for a quark based coin on Ubuntu Server 18.04.

Make sure that you have the following requirements.

– Required amount of coins to setup the masternode.
– A wallet to store your coins.
– A server or VPS.

The instructions are split in three sections.

Setup the control wallet (1/2)
Open your wallet and wait until the wallet has downloaded the complete blockchain.

Code:
Go to �Tools�. 
Click �Debug console�.
This is the console where you will execute all commands.

Create a masternode private key.

masternode genkey

Example output

75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo

Show your collateral address.

getaccountaddress "MN1"

Example output

Nad4xtgdwf7c5y45ruy5MWtVY43zYMCvva

Keep note of the masternode private key and the collateral address.


Setup the VPS
Install Ubuntu Server 18.04 on a VPS.

Update your Ubuntu machine.

sudo apt-get update
sudo apt-get upgrade

Install the required dependencies.

sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils python3 libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev libboost-all-dev libboost-program-options-dev
sudo apt-get install libminiupnpc-dev libzmq3-dev libprotobuf-dev protobuf-compiler unzip software-properties-common

Install Berkeley DB.

sudo add-apt-repository ppa:bitcoin/bitcoin
sudo apt-get update
sudo apt-get install libdb4.8-dev libdb4.8++-dev

Note: replace �examplecoin� with the name of your coin.
Note: replace �6gs39011kick8xmqutpkrvi92xx5kwev4ykanlv1ls0ouuae5x� with the coinID of your coin.

Download the daemon and tools from MyCoin. (Available for a paid coin)

wget "https://dl.walletbuilders.com/download?customer=6gs39011kick8xmqutpkrvi92xx5kwev4ykanlv1ls0ouuae5x&filename=examplecoin-daemon-linux.tar.gz" -O examplecoin-daemon-linux.tar.gz
wget "https://dl.walletbuilders.com/download?customer=6gs39011kick8xmqutpkrvi92xx5kwev4ykanlv1ls0ouuae5x&filename=examplecoin-qt-linux.tar.gz" -O examplecoin-qt-linux.tar.gz

Extract the tar files.

tar -xzvf examplecoin-daemon-linux.tar.gz
tar -xzvf examplecoin-qt-linux.tar.gz

Install the daemon and tools.

sudo mv examplecoind examplecoin-cli examplecoin-tx /usr/bin/

Create the config file.

mkdir $HOME/.examplecoin
nano $HOME/.examplecoin/examplecoin.conf

Paste the following lines in examplecoin.conf.

#----
rpcuser=rpc_examplecoin
rpcpassword=kuw05sqio7bcm8z96o7redv17xws1lw6xpd1qf33
rpcallowip=127.0.0.1
#----
listen=1
server=1
daemon=1
maxconnections=64
#----
masternode=1
masternodeprivkey=REPLACE_WITH_MASTERNODE_PRIVATE_KEY
externalip=REPLACE_WITH_EXTERNAL_IP_OF_VPS
#----

Replace the text �REPLACE_WITH_MASTERNODE_PRIVATE_KEY� with the �masternode private key� that you created using the command �masternode genkey�.

E.G. masternodeprivkey=75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo

Replace the text �REPLACE_WITH_EXTERNAL_IP_OF_VPS� with the external IP address of your VPS.

E.G. externalip=136.144.171.201

Start your node with the following command.

examplecoind

Setup the control wallet (2/2)
Transfer the required amount of coins to the �collateral address� that you created using the command �getaccountaddress "MN1"�.

Wait until the transaction has the required masternode confirmations.

Go to Tools.
Click Debug console.

Enter the following command.

masternode outputs

Example output


[
  {
    "txhash": "429a5caf40178d6911ab71e61d6952a6cec8710405d8dc912d8e8a760a2ba24c",
    "outputidx": 1
  }
]

Go to �Tools�.
Click �Open Masternode Configuration File�.

Modify the following line and paste it into notepad.

MN1 136.144.171.201:9999 75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo 429a5caf40178d6911ab71e61d6952a6cec8710405d8dc912d8e8a760a2ba24c 1

MN1 - Alias for your masternode.

136.144.171.201 - External IP of your VPS.

9999 - Replace with P2P port of your coin.

75eqvNfaEfkd3YTwQ3hMwyxL2BgNSrqHDgWc6jbUh4Gdtnro2Wo - Masternode private key from the command �masternode genkey�.

429a5caf40178d6911ab71e61d6952a6cec8710405d8dc912d8e8a760a2ba24c - Value �txhash� from the command �masternode outputs�.

1 - Value �outputidx� from the command �masternode outputs�.

Save the file and close notepad.

Shutdown your wallet and re-open your wallet.

Go to �Settings�.
Click �Unlock Wallet�.

Enter your wallet passphrase and unlock your wallet.

Go to �Tools�.
Click �Debug console�.

Start your masternode using the command.

startmasternode alias false MN1

It will take +/- 30 minutes to activate your masternode.

 FOXCOIN is an experimental project carried on by traders and coin developers in assembly. FOXCOIN aims to go further than other coins
in terms of community management and open source. Develop hand to hand with the community is a must.
Our team composed by anon developers, willing to lear development and create a trust with FOX community for future developments FOX based.
There is an amount of premined coins, 50.000.000, that will be used like a joker to pay exchanges, bounties, airdrop and any necessary improvement or
manteineance.
You also will be able to swap with bitcoin through masternode units, 1 mn = 1000 FOX = 0.001 BTC, swap will be closed, no swapped FOX will be  
sent to the first exchange where FOX is listed to offer them in a wall for newcomers. This wall will be placed for a 72 h period and coins remaining will be burned.
To swap cryptocurrencies with FOX contact us at discord or slack.
Fox is a friendly coin and its use must to be worlwide for internet,fast, cheap and anonimous transactions. Development is started now!

Based on PIVX
Proof-of-Work and Proof-of-Stake
Masternode
Anonymous transactions
Auto minting
Algorithm   Quark
Block type   Proof-of-Work/Proof-of-Stake
Coin name   foxcoin
Ticker           FOX
RPC port   6351
P2P port   6352
Block reward   50 coins
Block reward (PoS)   50 coins
Coin supply   Unlimited coins
Premine amount   50 mil coins
Last PoW block   block 10000
Masternode reward   50%
Masternode amount   1000 coins
Masternode confirmations   15
Coinbase maturity   5 blocks
Target spacing   5 minutes
Target timespan   5 minutes
Transaction confirmations   5 blocks
Node 1   
addnode=136.144.171.201:6352

The following bounties are  available:

Logo – 1,000 FOX
Webpage – 15,000 -50.000 FOX
Poker or another game – 15,000 FOX
Pool Share masternode service #1 – 5,000 FOX
Pool Share masternode service #2 – 5,000 FOX
Block Explorer – 5,000 FOX
Android wallet – 10,000 FOX
If you are interested in any of the above projects, or have an idea, drop me a PM slack before you begin to do any work so we can discuss requirements and conditions.
The Logo's bounty will be placed as the reward for a contest for its creation. The Logo contest can be found at slack server

Roadmap

-Project presentation
-SRC release to pools
-BlockChain stability
-Release updated configuration files
-Social media, Discord
-Github release
-Apple wallet
-Raspberry wallet
-Block explorer
-Bounty program
-Masternode setup guides
-Masternode shared pools
-Masternode hosting
-Website and multi forum anouncement
-Exchanges
-Fox services network
-Presentation to merchants, payment procesors.
-Monthly evaluation and roadmap retarget
-Solid White paper

Download master zip with wallets and source:

https://mega.nz/#F!W7x22IwY!_nLld8UE1r3yEKmnivEf0A

Airdrop rules:

Airdrop will be activated and rules posted in next ANN update scheduled every 24h

Discord

https://discord.gg/pgeRqYQ

SOCIAL LINKS
Discord: https://discord.gg/pgeRqYQ

Created by Neekel
0x24b4e4dc337f6604c5c667653cfad4b401ef3986
https://bitcointalk.org/index.php?action=profile;u=1360078

Leave a Reply